<?xml version="1.0" encoding="utf-8"?>
<!-- Created with exoImplantEditor CAD [Engine build 8776] [<64-Bit>]  -->
<ImplantLibraryEntry xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
  <RegistrationClickCenter>
    <x>0</x>
    <y>0</y>
    <z>0</z>
  </RegistrationClickCenter>
  <AxisAsymmetric>
    <x>0</x>
    <y>1</y>
    <z>0</z>
  </AxisAsymmetric>
  <PremillAbutmentColliderFilename IsDesignConstraint="true">CAMLOG_Premill_abutment_collider_EXO_Rev00.sdfa</PremillAbutmentColliderFilename>
  <DisplayInformation>Camlog - CAMLOG® Gingividual-basic for One-piece-abutment</DisplayInformation>
  <IsWithInterface>false</IsWithInterface>
  <IsWithRotationLock>true</IsWithRotationLock>
  <Keyword>camlog_CAMLOG_Gingividual-basic_for_One-piece-abutment</Keyword>
  <SupportOrientation>-1</SupportOrientation>
  <HeightAbutmentLimit IsDesignConstraint="true">
    <Min>0</Min>
    <Max>12.5</Max>
  </HeightAbutmentLimit>
  <GingivalMarginDiameterLimit IsDesignConstraint="true">
    <Min>0</Min>
    <Max>12</Max>
  </GingivalMarginDiameterLimit>
  <AngulationAbutmentLimit IsDesignConstraint="true">
    <Min>0</Min>
    <Max>30</Max>
  </AngulationAbutmentLimit>
  <ReferenceHeightOffset>0</ReferenceHeightOffset>
  <ReferenceRotationOffset>180</ReferenceRotationOffset>
  <RotationLockCount>0</RotationLockCount>
  <Supplier>CAMLOG Biotechnologies</Supplier>
  <SupplierLink>https://www.camlog.com</SupplierLink>
  <SupplierVersion>2024-05-28</SupplierVersion>
  <WarrantyInformation>DISCLAIMER OF WARRANTY


THIS DATA IS PROVIDED "AS IS" AND WITHOUT WARRANTIES AS TO PERFORMANCE, ACCURACY, OR MERCHANTABILITY. THE SELLER'S SALESPERSONS MAY HAVE MADE STATEMENTS ABOUT THIS DATA. ANY SUCH STATEMENTS DO NOT CONSTITUTE WARRANTIES AND SHALL NOT BE RELIED ON BY USER IN DECIDING WHETHER TO USE THIS DATA.

THIS DATA IS PROVIDED WITHOUT ANY EXPRESSED OR IMPLIED WARRANTIES WHATSOEVER. BECAUSE OF THE DIVERSITY OF CONDITIONS AND HARDWARE UNDER WHICH THIS DATA MAY BE USED, NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS OFFERED. THE USER IS ADVISED TO TEST THE DATA THOROUGHLY BEFORE RELYING ON IT. THE USER MUST ASSUME THE ENTIRE RISK OF USING THIS DATA AND ACCEPTS IT "WITH ALL ITS FAULTS". THE USER MUST ASSUME THE ENTIRE RISK OF USING THE PROGRAM.
</WarrantyInformation>
  <AxisOcclusal>
    <x>0</x>
    <y>0</y>
    <z>1</z>
  </AxisOcclusal>
  <PreviewV4IconFilename>preview.png</PreviewV4IconFilename>
  <SupplierV4IconFilename>CL_Camlog.jpg</SupplierV4IconFilename>
  <TypeConfig>
    <ImplantTypeConfig>
      <SupportFilename>CAMLOG_Minimum_Geometry_3.3_EXO_Rev00.sdfa</SupportFilename>
      <ScrewFilename>CAMLOG_Screw_3.3_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>CAMLOG_Print-Model_3.3_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CAMLOG 3.3 One-piece-abutment</DisplayInformation>
      <Keyword>CAMLOG33One-piece-abutment</Keyword>
      <ImplantConnection>
        <ID>CL_TT_P33</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0244343280792236</x>
            <y>-2.9478302001953125</y>
            <z>4.0747032165527344</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.11006470699447707</x>
            <y>-0.9939244238241759</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG IGOK-3.3_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.3 IGOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG33IGOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>6.9</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.3269896507263184</x>
            <y>-2.7079658508300781</y>
            <z>5.9473037719726563</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.28039494865169495</x>
            <y>-0.95988471847957524</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG IGOK-3.3_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.3 IGOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG33IGOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>16.8</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.059772253036499</x>
            <y>-2.8306694030761719</y>
            <z>3.839447021484375</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.18109536456942429</x>
            <y>-0.98346554028672872</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG IKOK-3.3_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.3 IKOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG33IKOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>10.9</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.3166632652282715</x>
            <y>-2.5355606079101563</y>
            <z>5.7192230224609375</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.35614006108387547</x>
            <y>-0.93443258552512676</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG IKOK-3.3_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.3 IKOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG33IKOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>21.2</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <SupportFilename>CAMLOG_Minimum_Geometry_3.8_EXO_Rev00.sdfa</SupportFilename>
      <ScrewFilename>CAMLOG_Screw_3.8_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>CAMLOG_Print-Model_3.8_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CAMLOG 3.8 One-piece-abutment</DisplayInformation>
      <Keyword>CAMLOG38One-piece-abutment</Keyword>
      <ImplantConnection>
        <ID>CL_TT_P38</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.2018303871154785</x>
            <y>-2.9408416748046875</y>
            <z>4.0304527282714844</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.17117065407570625</x>
            <y>-0.98524139538658</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG IGOK-3.8_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8 IGOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38IGOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>9.9</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0996445417404175</x>
            <y>-2.83428955078125</y>
            <z>5.8688201904296875</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.23065768450090493</x>
            <y>-0.9730349595881338</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG IGOK-3.8_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8 IGOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38IGOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>14</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0125482082366943</x>
            <y>-2.9059677124023438</y>
            <z>4.045074462890625</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.041341568551541086</x>
            <y>-0.99914507190382429</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG IKOK-3.8_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8 IKOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38IKOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>2.2</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0418715476989746</x>
            <y>-2.5459976196289063</y>
            <z>5.8399276733398438</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.2904827750501528</x>
            <y>-0.95688022103038706</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG IKOK-3.8_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8 IKOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38IKOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>16.8</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.2081918716430664</x>
            <y>-2.6802139282226563</y>
            <z>4.0369377136230469</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.19562080715290886</x>
            <y>-0.98067961119258751</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG EGOK-3.8_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8 EGOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38EGOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>12</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0214519500732422</x>
            <y>-2.56903076171875</y>
            <z>5.8768959045410156</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.18062928216437027</x>
            <y>-0.98355125053287606</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG EGOK-3.8_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8 EGOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38EGOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>10.3</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.083854079246521</x>
            <y>-2.6790924072265625</y>
            <z>4.1140098571777344</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.239709082186867</x>
            <y>-0.97084476406742282</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG EKOK-3.8_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8 EKOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38EKOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>14.3</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.99568766355514526</x>
            <y>-2.4847259521484375</y>
            <z>5.690399169921875</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.2978365357257316</x>
            <y>-0.95461688545033341</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG EKOK-3.8_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8 EKOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38EKOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>17.9</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.204679012298584</x>
            <y>-3.1120986938476563</y>
            <z>4.0808486938476563</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.28894425415541719</x>
            <y>-0.95734592389092554</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMOK-3.8_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8 PMOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38PMOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>16.7</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0652245283126831</x>
            <y>-3.0088882446289063</y>
            <z>5.8511810302734375</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.4111441926649741</x>
            <y>-0.91157032248634917</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMOK-3.8_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8 PMOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38PMOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>24.7</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.1191952228546143</x>
            <y>-2.73992919921875</y>
            <z>4.1338844299316406</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.22792733445217389</x>
            <y>-0.97367814508159045</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMUK-3.8_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8 PMUK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38PMUKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>13.4</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0426861047744751</x>
            <y>-2.6275253295898438</y>
            <z>5.6386451721191406</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.26766873479884312</x>
            <y>-0.96351100066952355</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMUK-3.8_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8 PMUK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38PMUKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>15.6</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.1013803482055664</x>
            <y>-3.920257568359375</y>
            <z>4.0755653381347656</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.11955459484513023</x>
            <y>-0.99282762796540713</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MOK-3.8_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8 MOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38MOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>7.4</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.2326765060424805</x>
            <y>-4.1660385131835938</y>
            <z>5.9211158752441406</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.14732014024229625</x>
            <y>-0.98908886166966326</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MOK-3.8_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8 MOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38MOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>8.6</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.1471884250640869</x>
            <y>-3.485382080078125</y>
            <z>4.0623321533203125</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0.030580565026155</x>
            <y>-0.99953230515210523</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MUK-3.8_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8 MUK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38MUKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>-1.3</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.1079789400100708</x>
            <y>-3.1924819946289063</y>
            <z>5.8233528137207031</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.18533690520134991</x>
            <y>-0.98267503864216776</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MUK-3.8_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8 MUK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38MUKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>10.9</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <SupportFilename>CAMLOG-PS_Minimum_Geometry_3.8_EXO_Rev00.sdfa</SupportFilename>
      <ScrewFilename>CAMLOG_Screw_3.8_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>CAMLOG_Print-Model_3.8_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CAMLOG 3.8PS One-piece-abutment</DisplayInformation>
      <Keyword>CAMLOG38PSOne-piece-abutment</Keyword>
      <ImplantConnection>
        <ID>CL_TT_P38</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.1028898954391479</x>
            <y>-3.040771484375</y>
            <z>3.8719253540039063</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.13719174005417517</x>
            <y>-0.99054451008569411</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG IGOK-3.8PS_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8PS IGOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38PSIGOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>8.3</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.1654007434844971</x>
            <y>-2.8328094482421875</y>
            <z>5.8490180969238281</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.25360295089897167</x>
            <y>-0.9673084013360651</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG IGOK-3.8PS_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8PS IGOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38PSIGOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>14.1</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0783326625823975</x>
            <y>-2.7621612548828125</y>
            <z>4.0118293762207031</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.22067161789725842</x>
            <y>-0.97534816196812846</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG IKOK-3.8PS_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8PS IKOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38PSIKOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>12.4</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0146448612213135</x>
            <y>-2.566558837890625</y>
            <z>5.8250503540039063</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.29054815951929019</x>
            <y>-0.95686036964645638</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG IKOK-3.8PS_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8PS IKOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38PSIKOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>16.8</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0017101764678955</x>
            <y>-2.9296035766601563</y>
            <z>3.9947776794433594</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.17347810272596961</x>
            <y>-0.98483772667104807</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG EGOK-3.8PS_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8PS EGOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38PSEGOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>9.7</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.1260881423950195</x>
            <y>-2.53436279296875</y>
            <z>5.8978271484375</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.18151852467527943</x>
            <y>-0.9833875254444252</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG EGOK-3.8PS_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8PS EGOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38PSEGOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>10.8</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.1036527156829834</x>
            <y>-2.6870880126953125</y>
            <z>3.9983787536621094</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.32256546294694033</x>
            <y>-0.94654715789221311</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG EKOK-3.8PS_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8PS EKOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38PSEKOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>18.9</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0937402248382568</x>
            <y>-2.4898834228515625</y>
            <z>5.6318473815917969</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.33728308399707757</x>
            <y>-0.94140327238087529</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG EKOK-3.8PS_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8PS EKOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38PSEKOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>19.4</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.95882368087768555</x>
            <y>-3.1636962890625</y>
            <z>3.956817626953125</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.36281264712970046</x>
            <y>-0.93186210518656654</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMOK-3.8PS_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8PS PMOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38PSPMOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>21.4</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0475654602050781</x>
            <y>-3.0918502807617188</y>
            <z>5.7463111877441406</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.41725426328874154</x>
            <y>-0.90878978854703774</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMOK-3.8PS_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8PS PMOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38PSPMOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>24.6</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.1054952144622803</x>
            <y>-2.7000503540039063</y>
            <z>4.0593490600585938</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.2898941680932583</x>
            <y>-0.95705870839019991</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMUK-3.8PS_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8PS PMUK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38PSPMUKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>17.1</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.2728391885757446</x>
            <y>-2.5546951293945313</y>
            <z>5.6437568664550781</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.30663495662437934</x>
            <y>-0.95182719197129739</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMUK-3.8PS_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8PS PMUK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38PSPMUKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>17.7</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0675628185272217</x>
            <y>-4.1668014526367188</y>
            <z>3.962310791015625</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.14708736468087924</x>
            <y>-0.98912350449841913</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MOK-3.8PS_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8PS MOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38PSMOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>8.6</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.3777008056640625</x>
            <y>-4.1367416381835938</y>
            <z>5.9259796142578125</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.18860205182051187</x>
            <y>-0.98205359632206068</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MOK-3.8PS_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8PS MOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38PSMOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>10.5</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0369998216629028</x>
            <y>-3.3635330200195313</y>
            <z>3.9222640991210938</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.12018321456223238</x>
            <y>-0.99275172875069251</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MUK-3.8PS_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8PS MUK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38PSMUKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>6.8</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0730209350585938</x>
            <y>-3.1788787841796875</y>
            <z>5.8450088500976563</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.18533690520134991</x>
            <y>-0.98267503864216776</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MUK-3.8PS_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 3.8PS MUK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG38PSMUKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>10.6</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <SupportFilename>CAMLOG_Minimum_Geometry_4.3_EXO_Rev00.sdfa</SupportFilename>
      <ScrewFilename>CAMLOG_Screw_4.3_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>CAMLOG_Print-Model_4.3_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CAMLOG 4.3 One-piece-abutment</DisplayInformation>
      <Keyword>CAMLOG43One-piece-abutment</Keyword>
      <ImplantConnection>
        <ID>CL_TT_P43</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.95834958553314209</x>
            <y>-3.0686569213867188</y>
            <z>3.8798599243164063</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.19190058269220606</x>
            <y>-0.981414370366764</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG IGOK-4.3_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3 IGOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43IGOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>10.7</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0745563507080078</x>
            <y>-2.76666259765625</y>
            <z>5.9542961120605469</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.23238832830631306</x>
            <y>-0.97262308468748437</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG IGOK-4.3_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3 IGOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43IGOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>13.8</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.91063201427459717</x>
            <y>-2.7207794189453125</y>
            <z>3.99810791015625</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.16078001997714544</x>
            <y>-0.98699026599868189</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG IKOK-4.3_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3 IKOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43IKOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>9.2</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.86650800704956055</x>
            <y>-2.6454849243164063</y>
            <z>5.7649765014648438</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.23554265194595914</x>
            <y>-0.97186401266548861</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG IKOK-4.3_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3 IKOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43IKOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>13.3</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0895911455154419</x>
            <y>-2.8132705688476563</y>
            <z>4.0245399475097656</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.1645259006290867</x>
            <y>-0.98637276321996437</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG EGOK-4.3_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3 EGOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43EGOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>9.7</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0234811305999756</x>
            <y>-2.6250762939453125</y>
            <z>5.7739334106445313</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.18060254770022285</x>
            <y>-0.98355615994420409</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG EGOK-4.3_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3 EGOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43EGOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>10.7</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.98136651515960693</x>
            <y>-2.6803512573242188</y>
            <z>3.9328346252441406</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.27582746717590784</x>
            <y>-0.961207162037052</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG EKOK-4.3_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3 EKOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43EKOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>16.1</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.89115810394287109</x>
            <y>-2.514190673828125</y>
            <z>5.6949272155761719</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.29783438181640481</x>
            <y>-0.954617557458504</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG EKOK-4.3_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3 EKOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43EKOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>17.7</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.97967934608459473</x>
            <y>-3.21710205078125</y>
            <z>3.9024429321289063</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.28346609025638386</x>
            <y>-0.95898226035456968</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMOK-4.3_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3 PMOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43PMOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>16.7</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0519907474517822</x>
            <y>-3.17376708984375</y>
            <z>5.5855827331542969</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.42167396419246406</x>
            <y>-0.90674752159695082</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMOK-4.3_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3 PMOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43PMOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>25.7</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.9442979097366333</x>
            <y>-2.8013153076171875</y>
            <z>3.9844818115234375</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.22447577080552522</x>
            <y>-0.97447967055309326</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMUK-4.3_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3 PMUK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43PMUKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>13.4</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0846495628356934</x>
            <y>-2.6843643188476563</y>
            <z>5.5036735534667969</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.27215823487677715</x>
            <y>-0.96225251113663357</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMUK-4.3_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3 PMUK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43PMUKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>16.3</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0963590145111084</x>
            <y>-4.0645370483398438</y>
            <z>4.0293922424316406</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.16796915413777752</x>
            <y>-0.98579225157141481</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MOK-4.3_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3 MOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43MOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>10.3</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.1664168834686279</x>
            <y>-4.2785491943359375</y>
            <z>5.82049560546875</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.15106398891394762</x>
            <y>-0.98852398618010617</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MOK-4.3_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3 MOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43MOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>9.2</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.1838959455490112</x>
            <y>-3.3413848876953125</y>
            <z>3.9850540161132813</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.11710493981825218</x>
            <y>-0.99311954621292375</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MUK-4.3_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3 MUK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43MUKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>7.4</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.1669361591339111</x>
            <y>-3.2036590576171875</y>
            <z>5.7992782592773438</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.187538376585089</x>
            <y>-0.982257276535954</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MUK-4.3_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3 MUK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43MUKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>11.1</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <SupportFilename>CAMLOG-PS_Minimum_Geometry_4.3_EXO_Rev00.sdfa</SupportFilename>
      <ScrewFilename>CAMLOG_Screw_4.3_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>CAMLOG_Print-Model_4.3_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CAMLOG 4.3PS One-piece-abutment</DisplayInformation>
      <Keyword>CAMLOG43PSOne-piece-abutment</Keyword>
      <ImplantConnection>
        <ID>CL_TT_P43</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0137714147567749</x>
            <y>-3.0106353759765625</y>
            <z>4.0502738952636719</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.15290853661109136</x>
            <y>-0.988240344972545</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG IGOK-4.3PS_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3PS IGOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43PSIGOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>8.9</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0548288822174072</x>
            <y>-2.8813400268554688</y>
            <z>5.8119049072265625</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.22832680215611284</x>
            <y>-0.97358454764707691</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG IGOK-4.3PS_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3PS IGOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43PSIGOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>13.4</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.02596116065979</x>
            <y>-2.8773574829101563</y>
            <z>3.9662208557128906</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.21996189082466644</x>
            <y>-0.97550846566538707</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG IKOK-4.3PS_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3PS IKOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43PSIKOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>13.3</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.99201679229736328</x>
            <y>-2.6889724731445313</y>
            <z>5.6054534912109375</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.26470151493384653</x>
            <y>-0.96433039358496142</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG IKOK-4.3PS_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3PS IKOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43PSIKOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>15.6</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0729022026062012</x>
            <y>-2.8930282592773438</y>
            <z>3.9450759887695313</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.21618617795063522</x>
            <y>-0.97635215801630526</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG EGOK-4.3PS_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3PS EGOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43PSEGOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>12.6</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0260097980499268</x>
            <y>-2.5893783569335938</y>
            <z>5.8380126953125</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.18064184351341894</x>
            <y>-0.9835489435569913</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG EGOK-4.3PS_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3PS EGOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43PSEGOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>10.6</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.92500734329223633</x>
            <y>-2.9239425659179688</y>
            <z>4.0191764831542969</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.15792711741576668</x>
            <y>-0.9874507712208983</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG EKOK-4.3PS_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3PS EKOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43PSEKOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>9.5</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.96108913421630859</x>
            <y>-2.5104522705078125</y>
            <z>5.6686210632324219</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.29098342127222071</x>
            <y>-0.95672809540888537</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG EKOK-4.3PS_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <InterfaceFilename>CAMLOG-PS_Minimum_Geometry_4.3_EXO_Rev00.sdfa</InterfaceFilename>
          <DisplayInformation>CAMLOG 4.3PS EKOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43PSEKOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>18</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.92060637474060059</x>
            <y>-3.2207794189453125</y>
            <z>3.9451465606689453</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.37810457512275053</x>
            <y>-0.92576289095601816</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMOK-4.3PS_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3PS PMOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43PSPMOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>22.3</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0322721004486084</x>
            <y>-3.1404800415039063</y>
            <z>5.6764984130859375</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.42169675326196332</x>
            <y>-0.90673692341732659</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMOK-4.3PS_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3PS PMOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43PSPMOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>25.3</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.95146727561950684</x>
            <y>-2.99371337890625</y>
            <z>3.8499736785888672</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.24476176863051985</x>
            <y>-0.96958324893577852</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMUK-4.3PS_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3PS PMUK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43PSPMUKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>14.7</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.98170042037963867</x>
            <y>-2.7040939331054688</y>
            <z>5.5291233062744141</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.27215634803827221</x>
            <y>-0.96225304479771379</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMUK-4.3PS_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3PS PMUK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43PSPMUKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>15.7</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.194988489151001</x>
            <y>-4.0576553344726563</y>
            <z>3.9793586730957031</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.16944441833467813</x>
            <y>-0.98553974506116326</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MOK-4.3PS_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3PS MOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43PSMOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>10.2</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.4081799983978271</x>
            <y>-4.1986312866210938</y>
            <z>5.8662014007568359</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.19264831744361133</x>
            <y>-0.98126786647996667</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MOK-4.3PS_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3PS MOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43PSMOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>11.9</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.2420365810394287</x>
            <y>-3.2909774780273438</y>
            <z>3.9886951446533203</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.11438585191372724</x>
            <y>-0.99343639800541383</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MUK-4.3PS_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3PS MUK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43PSMUKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>7.5</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.155163049697876</x>
            <y>-3.13201904296875</y>
            <z>5.8786373138427734</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.18533690520134991</x>
            <y>-0.98267503864216776</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MUK-4.3PS_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 4.3PS MUK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG43PSMUKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>11.2</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <SupportFilename>CAMLOG_Minimum_Geometry_5.0_EXO_Rev00.sdfa</SupportFilename>
      <ScrewFilename>CAMLOG_Screw_5.0_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>CAMLOG_Print-Model_5.0_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CAMLOG 5.0 One-piece-abutment</DisplayInformation>
      <Keyword>CAMLOG50One-piece-abutment</Keyword>
      <ImplantConnection>
        <ID>CL_TT_P50</ID>
        <ID>CL_TT_P60</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.94534134864807129</x>
            <y>-3.1322021484375</y>
            <z>3.9955387115478516</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.23519487672709133</x>
            <y>-0.9719482341983694</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMOK-5.0_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 5.0 PMOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG50PMOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>14.7</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.94934511184692383</x>
            <y>-3.1768264770507813</y>
            <z>5.6716194152832031</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.36041513271507331</x>
            <y>-0.93279200902986736</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMOK-5.0_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 5.0 PMOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG50PMOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>21.7</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.019913911819458</x>
            <y>-2.847320556640625</y>
            <z>3.9960441589355469</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.20785589845226954</x>
            <y>-0.97815945810414773</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMUK-5.0_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 5.0 PMUK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG50PMUKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>12.6</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0323715209960938</x>
            <y>-2.7025909423828125</y>
            <z>5.4943675994873047</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.27216559346622843</x>
            <y>-0.96225042984307141</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMUK-5.0_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 5.0 PMUK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG50PMUKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>15.7</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.2090392112731934</x>
            <y>-4.1795120239257813</y>
            <z>3.8760242462158203</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.14802765184910965</x>
            <y>-0.98898322245022885</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MOK-5.0_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 5.0 MOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG50MOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>8.6</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.2659099102020264</x>
            <y>-4.2048721313476563</y>
            <z>5.8831405639648438</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.14847803218424435</x>
            <y>-0.98891570619476687</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MOK-5.0_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 5.0 MOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG50MOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>8.6</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.2049829959869385</x>
            <y>-3.4193267822265625</y>
            <z>3.8673095703125</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.087514118545831854</x>
            <y>-0.99616327931476478</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MUK-5.0_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 5.0 MUK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG50MUKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>5.1</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.2325413227081299</x>
            <y>-3.2036056518554688</y>
            <z>5.7858333587646484</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.187538376585089</x>
            <y>-0.982257276535954</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MUK-5.0_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 5.0 MUK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG50MUKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>10.9</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <SupportFilename>CAMLOG-PS_Minimum_Geometry_5.0_EXO_Rev00.sdfa</SupportFilename>
      <ScrewFilename>CAMLOG_Screw_5.0_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>CAMLOG_Print-Model_5.0_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CAMLOG 5.0PS One-piece-abutment</DisplayInformation>
      <Keyword>CAMLOG50PSOne-piece-abutment</Keyword>
      <ImplantConnection>
        <ID>CL_TT_P50</ID>
        <ID>CL_TT_P60</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.89793539047241211</x>
            <y>-3.2702178955078125</y>
            <z>3.9442920684814453</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.33865631925096573</x>
            <y>-0.94091014312281063</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMOK-5.0PS_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 5.0PS PMOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG50PSPMOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>20</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.89642190933227539</x>
            <y>-3.2189178466796875</y>
            <z>5.6245174407958984</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.35905353207250074</x>
            <y>-0.93331696711581424</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMOK-5.0PS_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 5.0PS PMOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG50PSPMOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>21</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.945406436920166</x>
            <y>-2.9085922241210938</y>
            <z>3.8476486206054688</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.16588722064434605</x>
            <y>-0.98614473077073939</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMUK-5.0PS_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 5.0PS PMUK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG50PSPMUKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>9.6</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.95010948181152344</x>
            <y>-2.7255020141601563</y>
            <z>5.4948654174804688</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.23516273636509732</x>
            <y>-0.97195601105465657</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMUK-5.0PS_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 5.0PS PMUK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG50PSPMUKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>14.1</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.1189529895782471</x>
            <y>-4.1603851318359375</y>
            <z>3.9580211639404297</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.17732972202876193</x>
            <y>-0.98415149732406648</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MOK-5.0PS_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 5.0PS MOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG50PSMOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>10.9</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.2730166912078857</x>
            <y>-4.2631988525390625</y>
            <z>5.81941032409668</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.15173690867220052</x>
            <y>-0.9884209176998453</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MOK-5.0PS_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 5.0PS MOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG50PSMOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>9.1</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.1290452480316162</x>
            <y>-3.5295028686523438</y>
            <z>3.9698257446289063</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.0350976471434771</x>
            <y>-0.99938388778536558</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MUK-5.0PS_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 5.0PS MUK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG50PSMUKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>2.8</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.2234926223754883</x>
            <y>-3.1826553344726563</y>
            <z>5.8102664947509766</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.187538376585089</x>
            <y>-0.982257276535954</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MUK-5.0PS_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 5.0PS MUK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG50PSMUKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>11.2</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <SupportFilename>CAMLOG_Minimum_Geometry_6.0_EXO_Rev00.sdfa</SupportFilename>
      <ScrewFilename>CAMLOG_Screw_6.0_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>CAMLOG_Print-Model_6.0_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CAMLOG 6.0 One-piece-abutment</DisplayInformation>
      <Keyword>CAMLOG60One-piece-abutment</Keyword>
      <ImplantConnection>
        <ID>CL_TT_P60</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.93642735481262207</x>
            <y>-3.3098220825195313</y>
            <z>3.8939857482910156</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.27119927514227027</x>
            <y>-0.96252322214183861</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMOK-6.0_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 6.0 PMOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG60PMOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>15.8</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0280454158782959</x>
            <y>-3.2338638305664063</y>
            <z>5.7483711242675781</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.35417415571325728</x>
            <y>-0.93517948406966322</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMOK-6.0_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 6.0 PMOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG60PMOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>20.8</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.97381019592285156</x>
            <y>-2.95562744140625</y>
            <z>3.9104480743408203</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.11804464246707505</x>
            <y>-0.99300828918233131</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMUK-6.0_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 6.0 PMUK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG60PMUKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>7.1</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.0691030025482178</x>
            <y>-2.79296875</y>
            <z>5.6298828125</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.27229920943773994</x>
            <y>-0.96221262750993974</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG PMUK-6.0_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 6.0 PMUK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG60PMUKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>16.6</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.1617789268493652</x>
            <y>-4.1060409545898438</y>
            <z>3.8575630187988281</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.11085657705957429</x>
            <y>-0.99383641476987283</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MOK-6.0_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 6.0 MOK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG60MOKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>6.3</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.1092379093170166</x>
            <y>-4.2930374145507813</y>
            <z>5.8137435913085938</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.11265563731270427</x>
            <y>-0.99363409129400782</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MOK-6.0_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 6.0 MOK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG60MOKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>7.2</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.2554469108581543</x>
            <y>-3.4352264404296875</y>
            <z>4.0044651031494141</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.035103163603151064</x>
            <y>-0.99938369403600458</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MUK-6.0_GH4.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 6.0 MUK GH4.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG60MUKGH40Scanbody</Keyword>
          <ReferenceRotationOffset>2.5</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-1.2360024452209473</x>
            <y>-3.1370391845703125</y>
            <z>5.8568611145019531</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.187538376585089</x>
            <y>-0.982257276535954</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG MUK-6.0_GH6.0_Scanbody_EXO_rev00.stl.STL</MarkerFilename>
          <DisplayInformation>CAMLOG 6.0 MUK GH6.0 Scanbody</DisplayInformation>
          <Keyword>CAMLOG60MUKGH60Scanbody</Keyword>
          <ReferenceRotationOffset>10.9</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
  </TypeConfig>
  <SignatureDate>2025-11-28T15:59:55.9552737Z</SignatureDate>
  <InfoSignatureV4>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</InfoSignatureV4>
  <InfoSignatureV5>HaTUzpPySyvn5WNK4ozNbtcUJesW/C43MEdAuB6bHG7YLy2ObMA6+UopoExZv5B19v18C0yFeuhhS4anbJQJCj8td1UQYK/D1/bKsHcDrBJBpfSWjJhMVxs1gmOUD6PEYAYet5+eeSg7IegKqXO/B4VpPK2ICq7msRwabRnX2sQnPt5s+Q3Tx90SlIkmhe2RkD9kQJeYAjdgyJT2oAELtuWQL0I+h6i/v3PsvHiGVvrevTzIVI2FUJ1VVbYrwps7ugko/Bqt8962aDN9YrEuN8dlj0vTwd1MF1PX0npbI2DYTdkYf1iMI8xt7DaNIa7HV//9d1KBwS+MZozSvpF83RMI7YnB0VFv7xjKtkQ5zOq+nOx72OsknJE7//sRCh0Q/c1UKGDO+IrEx7Js85OQzJiZu6Dg+yY+v/R4YQ97d/O3VsQ0Oj776ozHIR8qgio9ONZ8B3ocpvlQCnaRB1GZgIduu6Y6jDf0FpfnQxTBm5sRCyyJ9VqlqzcIkKkKdKZFbwVATOff711Fg2GHcgEAkKX6CUjUzTZi6S98SC4WR/LWEC+Ihnb3BFKZ0mn0zlz26YyaSzDNVgN5P1fHMmZxMgu0CCW/89BMCmdxP48M9GlAW80SfmHN3xnS7i3zNX1x2RljKiB1bT237yBwgafqe+xqfhwxWYixk5Dy3qxpUXQ=</InfoSignatureV5>
  <InfoSignatureV6>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</InfoSignatureV6>
  <FileSignatures>
    <!--  NOTE! Signature is provided ONLY for specific mesh properties -->
    <!--  NOT for accuracy or suitability to a particular task.         -->
    <!--  A valid signature from the software vendor does NOT imply any -->
    <!--  warranties or statements regarding the data's correctness!    -->
    <FileSignature>
      <Filename>CAMLOG_Premill_abutment_collider_EXO_Rev00.sdfa</Filename>
      <Signature>Z0C8gxYYbSYyxrGjN9BQEue4X0XDZT6RTs/0oNN03RulsnOfrZIogCPlYo/6sSslv/kgMjbZx6x9LPTQImF/+A==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>preview.png</Filename>
      <Signature>YVvsJfwSqwyFJV/d3i4jw7CB8LPbGKswi1zMCoYa5aF94NTEd9L3f0u2OqzpMVyfiadkGL4jhwVPyRLgQVk2PQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_Camlog.jpg</Filename>
      <Signature>OirZtw51NeOPsqZ3O7cCBbRBkhK/LgYRZXw7CWzrt2c7moDEYNDb7JpjfUQFOFkuQHjf9JReCipaOZ7D1LkyWg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Minimum_Geometry_3.3_EXO_Rev00.sdfa</Filename>
      <Signature>rzSfP+yjXpG0EzSoKRY0LeV70nvCaW3250SBxLBd697DCWA0Q5by3pqS6ubpLl2qf2zjnKjIHQuM7g4g+Tdo+A==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Print-Model_3.3_EXO_Rev00.sdfa</Filename>
      <Signature>k/2QmO2bJLMyzwNzSPLOscN+dSQ95mCutAegscsbR/aS8VbRxraxHfo+6aG1EqVN0I+eOnqeuY2nPeiSMza2RQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Screw_3.3_EXO_Rev00.sdfa</Filename>
      <Signature>3f/TBsDajVgi1IhK19V11c5mRGSHW1cXM+QT5ZTk0vTEwVTpr4xLFt0ExY32SCMoYNg3GZAcezWfE56wpa3xgA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG IGOK-3.3_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>Cmik0xhcUAoy6d8ok8GDzwak2RQVGSF5ekuiAh2S8pCFDjNam8lYwK9mwZp66yBtH6vpGViK/4ARLavCTm83sA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG IGOK-3.3_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>SM6Abg7b8lz+vMf9apm+sfDNzDjziH76J7som0CsOaAU71y0pSJ7wltLF0EA2x3mYPGfPWrtm5t7fCbIlTvtiA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG IKOK-3.3_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>gKaGr2YG57POllCkPkhtXhuXjGSculYVi7oEFi45bG3QXl9eLdXiOYOHRpO+eGsOfeO3/EGbTuE1RvlZVlQCXA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG IKOK-3.3_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>D+nLh31EcZsWsotcB7yCR0Ho+6hkD3zlpJYyVkgPg4l/Ec+5WegssJqVVG5CW5lytcuCrOlDMNCmkDHkVsq6IA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Minimum_Geometry_3.8_EXO_Rev00.sdfa</Filename>
      <Signature>O/sV8YBeoVd1kwN9kbyOk1a0jgJX8j8snGcs6YmucyJBjhtgNe8ldEQQwgKa89hEvprFopQT/Zu8RrtQCMBiDA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Print-Model_3.8_EXO_Rev00.sdfa</Filename>
      <Signature>d1GeJNR6o4j0nDF8eLysox9H3QCXW6ME5eUhK+rX8cX9pl/3vX5+A+3gOMrqiWxytrx8ufDZxfOoPNBXZtgVJw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Screw_3.8_EXO_Rev00.sdfa</Filename>
      <Signature>3f/TBsDajVgi1IhK19V11c5mRGSHW1cXM+QT5ZTk0vTEwVTpr4xLFt0ExY32SCMoYNg3GZAcezWfE56wpa3xgA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG IGOK-3.8_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>P009r/HdcXUIbHWrK3UexflTUKFK0nTgBTzAwMMwjRSCuIdPaQXjGa03OuVaTWmSg+MzxH7idLtf1VWEp7RKGg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG IGOK-3.8_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>XHQfrwRG4rM3MQ0m+3jtA6aOZE4kFsw/B3WXnMSmQhW3f/z9BamNDYALkQI9TcEIpXL6GkTReY+LTD+pZL/avg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG IKOK-3.8_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>acaCsHUWMTGacXkSDhw55k+fyfzJx8D/lV3YwQRrto0bRhqhjKZDK/Ihu68YwA2C61pNqzG5Ns0aLPrAjOavQw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG IKOK-3.8_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>j9FY+ILwaDI8YrJH3T2PePnOsv504qla4Wh1iwRp4qHCvb4/nXzGjANfmZTmDUi3VOr+zsSdoG11Q2qPo6rNCg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG EGOK-3.8_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>sojRfxFTH64es96nEhypUs7O1SEhbYwGuVY9OI3UWqJayJyhPbLoAhEDan8NX98uoBPxYUY0K8ozBmlrsnkisw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG EGOK-3.8_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>aFGWsysUfv2OZgL7uk/Z2WuEMfDk3UHtVQKJA1zaj0CxpJ+VT2ocRfScaNMLFsg2cMXpb0MHeSvQPj7fAjgmTg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG EKOK-3.8_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>BQvBZeP2/RcZWPZiL0GQJz8ThCM1Q0KISysNL6x+Xo81iRnbDmNkIyye9T1lLEmTwCtQi+18wkS5GJpsmDeaeA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG EKOK-3.8_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>IlhrYjRkwFyV5NCYfo0MK3z5PqXRQjsC5lkzxddlT4gog37+N51zNUR2NeXjnB2ah/Lozw6eG4l43sfLw4O1MA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMOK-3.8_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>1GeeIZTFsJGj5QMu0O9GVUzZibpk4jD7qzrsdQX4dNhKKV1nJxGC1elMZc/EFxl8MkePo/MtK40OshFUviG6bA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMOK-3.8_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>Ipq6/AqfXrqYD1rVHwUQnsiGpGwCBUPBZOSDijDduBfJ89NBd1MAXPrk7f/FF5wyz0pL5ivhauB5L8bgQisXLA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMUK-3.8_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>TeGqZiSuC735AskxrYttyV3dN+FPvGOwPxwIbCKo6Ar5eNsNidzp2BJgAPOBy5P/WuROrT2wwGxmPoVXKKtVrw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMUK-3.8_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>qhSQYDqDzyr+RYXi2+TisLnkjeJgo2eeruLPI8ogIawYJfZPHe6d9qaeH7mbcegUsRNG2EqktfnoD56/1KXNSg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MOK-3.8_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>+9jIcp2dwTLbNFE2qoBeOHHad7h98aCsu3PeI26dW2jwtGm98sEWdzQiwwbsndnPKnwmLa41XMo0y/jFNJxFZA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MOK-3.8_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>yVQ1lExvY/CrlkwksEokt+MpbZBuC1vFd3WjjmcQB7GyiePKFNvFEapDWZ8pV3AhqQya6y7gxw4S6Q7HFhc5WQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MUK-3.8_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>W50ib7eO0H9RApGCOCG/exHIGStAZzJ++yWaYlFZkJKp9BnDMPQt3g4giyOpDULY/5BUQ7w3LYFfFpfBonlUwg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MUK-3.8_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>9wz79VA7Rio4lEtMVg7LhIF0Hl/pKP3er8YAz8zOlpzIqb4Z7EPbKx7GktG/4gxanhfwjbn2ZDVM7YiW/vb1Jg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG-PS_Minimum_Geometry_3.8_EXO_Rev00.sdfa</Filename>
      <Signature>6YQAnUz+8nVbH1dqVCaAHxNbvToEjbOnenGA3Ov1bKIg0Xw+hGpWt2KxEErq7xVmwsjrMlUG1wrHL5xvuGUT3w==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG IGOK-3.8PS_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>sg8zP2kTBkp1Xz8V0C2MXXsIkEEI3xNas1cHjUtDi3UdhVMNBK7jpaNZrHvwxtvLwX5zud2PD1yUqEsq2MLRtg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG IGOK-3.8PS_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>VdLq0rh/53GOywyaMYjLYfpctsXzGY/Eq2lTn5kYW7y4ZeE2xpxoHGbEWreVaUdSs1vynx3CRABSzf3TI17pXg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG IKOK-3.8PS_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>uXhA87pWu6JV4P0aTKABh9RXJTeKd6pOekKmN5R/UXEFlUa31se/5TSr84SGzeveYZnbTRa+CeLn3hoIAXxFZA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG IKOK-3.8PS_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>5+EzcxxdnwtQ1jnQBSNubFvJVuIdPVrfeRfk1SlRfhLnhzFuQpdbtGgRC8l2EXtjOG/yu2we6WSbwekeKdMjdw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG EGOK-3.8PS_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>Bz16zb2lywMGnEx8mf49/Y+FH4/3UGNDY41U5ne3G+MkM7SVMJg68VHXJDUqPAtcqZ75rSXRlUL2kwPtP3RyqQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG EGOK-3.8PS_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>bypHfFuhuoGhl8l4W4uZZEfsDvVimTB6RqfFre7pFLVfL4LfBnQx+MVCNtPIwVPkgo3spX0KboIw4sxh9nndxA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG EKOK-3.8PS_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>ksGaLICArv3X7NlGNq98qCbIiiGaOt528PJctnlzVNGKDQcFwDtP9HzQO2dnTlyuOV2Tbz6S4g0UKNjU/FDLpQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG EKOK-3.8PS_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>YGoTOhmpBLqTQ/kc+dlv+YUq4Nrwv4idjIjAWNgO9c/ZnW6yzvE04+2XuFRPsoxPFVp2WIlEVq1AaQwbvSHG9g==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMOK-3.8PS_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>4FtYrw1EKHXbHI9+hjk+1LZhptPaBdVTesQ9FGtiQ9uMUWEYidh182+wVfPjA4z/XEWQCaQCbLTK2UV6+nUg+w==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMOK-3.8PS_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>KEgKALXiUzNuAXXY56LZv+EtLfZzwwKZ9tNP0YNKZgl5sqJp3VGLHnKYoo35qOxK5lztzoML6l5XFwPUoVVFPQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMUK-3.8PS_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>LWEmtPf83lZ3VsvNHkB8TO6ojvXRkRmQuAIWTFAkTjaA9Vw13hOZ3ZQqVfSGcUGvbOC2vptC98jlXF3YsldTwA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMUK-3.8PS_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>IEjQah1dZ1TkR3d2ckRN3va5bem9veAsW7V0w8jLs/nNDtDPkSr95vHuy+S1hExZleRIb9OiNAcFkQ/ggz9lzg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MOK-3.8PS_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>blBIpAAU362Ge3EkqzfCCuYnZ/4EmJALZfxMrl30OYNY5kwrLfor/AP5SRg/W3lMrn0K/Vt2dYMTwQSqoC8jCA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MOK-3.8PS_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>WlC0YoH77kWioxwITaLMpn9sPIAAnV7VncO+hd4Xy7YMzQCLY/uDSBKhhtuNWbNkcIDvc2UKAhwOps/v/MPjQw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MUK-3.8PS_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>Lu30OL5Sz9ckzxiChLuPFnGSbTw2WRjdPzovWUE6/yWtM3chgCOZRympdeAZBkfDFyIyk10f1nXdMxytfWdAcA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MUK-3.8PS_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>tiByBjOZAILGOTbjlSUwzZC/2mC3118uQ5kHYepUpVc1yOKUpVoGu95vMtrH4ObfTw6qTbTvAndwFTb2YRpxSQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Minimum_Geometry_4.3_EXO_Rev00.sdfa</Filename>
      <Signature>jn4pHWVqMLxx9PHqSMsDKXlVavuiX1LdokKubNaCEzLko4lkOmZOHuT6UH+SBI+1DpUSvvBKqmgc4jL4CGrDOQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Print-Model_4.3_EXO_Rev00.sdfa</Filename>
      <Signature>v3h/ML/DkFgb9nYA7zaBEWdiGP+ldnZH/VgxpiG/VyUX5tMhQGmko5k1fw2ZvIp6hDDx84pBeNo/JJaCVq301g==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Screw_4.3_EXO_Rev00.sdfa</Filename>
      <Signature>3f/TBsDajVgi1IhK19V11c5mRGSHW1cXM+QT5ZTk0vTEwVTpr4xLFt0ExY32SCMoYNg3GZAcezWfE56wpa3xgA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG IGOK-4.3_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>m9H8NHIInyZzfpjIO2qA8AG3678Li9VCYhbd9A27EGnk8nKgXhvzrNLDbM6soNvIQl+5tEHLTju9WqP+N6zORA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG IGOK-4.3_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>3CvNPmUsjDE4cR9jotlbIrpFW55ta1yIBMI0HBrWA1UodE3G35Tk5xp6lzi0ivh3JcT98PTU6zW2vQKrwa3WLA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG IKOK-4.3_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>XdhoM4kdqVtqMemzMfnjNgIr9SWoZMVUgmjZit2+H52tY9mjn6RClgq8pyV06GRy3+bnyDZPzgJhjc53wrk0aQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG IKOK-4.3_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>O7cD8gRkIoMO3TCvq0Vy2oAI/fqQLbijlRb5EkMVFjOSwFDJdUfB6D0RWOF1eRyCl2LZ9flIp8yJz0Tm3q0K4Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG EGOK-4.3_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>fMAjN4Rpg1pegm8dLfeEF3TBREyAb6q9RnFIW2uOm+ejOhHTIGsRA0NNmjkH6AVGKAhVGGHAtkFhsES/iJGanw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG EGOK-4.3_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>AbXftmJUKJ6Kf51xLJowUH/4+gB1ksasc7rmUJETOm7pWQiPGiIyJB7MUVhSTUOm2FlLr6bUJRuvGEpLwZNIsg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG EKOK-4.3_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>Aa0XSsMF9iPNFJc0/tDmZv/YCtSjDzCF8PbyURBRNptjZTsAaTOdnEsNohr8EFOfhiChOltK9yFTZrNfWqNK1A==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG EKOK-4.3_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>uFIVgFoCxnkIztjSoaPdhEla0ydwkv2l8cTXXyYnRUdWq2m2JMh+JIDmuGu3llDsM2kVVY/bJ0yDSWFanDEwIQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMOK-4.3_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>G+/+HevMVefiFVphDFdqt0gt3uPCKquUbPt+dN6IeFD42DX/mamcnnjjvxYpiwJUKqWtyFLBs83X8QkH/iYSeA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMOK-4.3_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>36XlFUOtqEMOs/va4xbLmyDLG2j7qWIL5hkw7KDzvwG5AQ41NbU4haJ7ug6PYuBd+na9y1Ux2lOMWeRFmyDl8Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMUK-4.3_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>RA3sGpp6zMeC55QJx8XYUnzaP00nrJiuhuKvYrtZoIKCBmZtUUSVGZc46R/5GM8jfH+mmbSm1HHAOUh0R/J2GA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMUK-4.3_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>+22JsiKVBT8fJBrGaT+by1DlGPnTpU5tgiBmnX+TKUL5Xt7CwF9TA9uGUvJzJIETOicFzp4rdrx9g2t4dDBJCg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MOK-4.3_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>WUoL2qib+IqrIKw/J6MEhm1yXj1EkSk6sTxpvIkhyl/R0YMZFuV/Q54H7UgcOaZZ9Av+bkh7nfBLy+PWJ2rlWA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MOK-4.3_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>Ge+5BmnahoOm+9XBVVXb1a6LmC6b67kP0PMTN5wq/+SteAVVecK9d5zCYzJvlEbldk+4BZ8kzIy1XKqXXMpcRQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MUK-4.3_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>nflwPtG2ETqfPfwbRKGnLHgFALyfj0mJ6SCpNwMUiYAJqhWjqKWKTGdKyfQpV7uxEia7E4IKRem85r+9ubJCQg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MUK-4.3_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>Ru3vm4MWWFk65Cb0KyCwEYwnlAJvFeA8FRJmsg+fD3qxc2UFYQJS6mFiFCY/CdGz+w4kzSzduHU9ey6juD6WGQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG-PS_Minimum_Geometry_4.3_EXO_Rev00.sdfa</Filename>
      <Signature>yzu+mtXomvfp/U2GdGROPtISjUEM+S0+9xoqoE75+p0DGf5rtYQxXcYrx/AcfhCwZ6/aYb4KSKjml1jUDS7/ow==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG IGOK-4.3PS_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>RK8IFghxT3w+YcpjhsQBy4I7BYIPhRhRITGSCkJnoSVayBJeDTCHSh3ASxOozEeAqm98TsEZIGrGZXt8dHtUJA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG IGOK-4.3PS_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>7OcYSzrQlW7VIrTfc8Vk/MA8lZzI7cy0zwaPEqp3l2WBRkhaic5fQyL47kneXYsjrY2W0oFeeJbaAE6FcZDHqw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG IKOK-4.3PS_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>nr+t62TcdPxEokkvXcEdRH4toruFeooKMra+mSpfauPr2DayJn5j3gk085Rt6FdZfWgYHN3gGuQmjdnrRk88KQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG IKOK-4.3PS_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>i+IOJEpPtd1ObBhxayBagtC+2bG7Cl6w+yz4+BBf94W+WNE00Nv+iFawfKls9Z/b8fWA1h2BQhEel2rhSqmxuQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG EGOK-4.3PS_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>AXC2b2fwX9Et1v0R2q4F/n4hYp9pfBabVIWa3zotiR0mEjlG8usO+tRXauGSE78aZ0MK41JB/adatKcpOJGocg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG EGOK-4.3PS_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>tpHVhtA5hvLITZ1Il84kXRGmby6wPVdHRdfFPiqM0X+gGOvan701U+zydIIer2L8F1nFO/mboA8os433OWA+bw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG EKOK-4.3PS_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>BTyLIZBMeuoPHPAwGZ7IGOxk2jipk7jPVUSCb+U0QKabOaQzu2FAeW6dQsW1lySeng4s+jVpsEwVqLh8f3cZ4Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG EKOK-4.3PS_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>aPO5sbZCfGM8sEiYq7/EvuUeIbe6xx1zuLgVczuMYFmr08fpe7tnREJ248h0uftkUqj6lmJdm3amvbPM8q6ATw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMOK-4.3PS_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>UcmZSZLJrtAV8JnbISEL/dGnhBskYHL0vW8EM6OsomYiEEatxgIC3orm7rqLVZvNEuvmAXsruSSHmncTESDTew==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMOK-4.3PS_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>ndRszP9Y1eCIjYWhUmFJjZYN+/4dZjOC2+kyHoIpc+g+IHfpxnFKF4eaz7RCOC1s7lEnqQQCli+uESy35vsgcQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMUK-4.3PS_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>yqiAsmYv4tVI7OpYp4E5VtObePSSi98QdxQzYLevtLDp1/tL22ooU3EvWtua/7nv31Np0sIzr0IZugCbeXvFkQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMUK-4.3PS_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>4vDlNZ/hzoJrYeNrEDTcJ2JkRHlkQpolk7oYnyEHieHCK+ahrFd6VrOio6Cwntls1ysG2MTGY8gFmt7utfqldQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MOK-4.3PS_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>x8HtDqOW+Z5+Lf3Y+ehEEgKqA4KLO4ws4M3jCV/D7aYLEP6paV6nOtL/yZW3peuZTJxJ1AS4xwPnfB3y2Kef9w==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MOK-4.3PS_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>haKpQTTmH7mzDC11ebvNNOldUVaWnpx57re8d1fkc0UWV4DwfSPLoLccHhW9cMCAL1BwD6O7x8g94QRf8y8TSQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MUK-4.3PS_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>heA3QtUpu9IKDBh6PoNC5LdWv4k6n6zdlULkmI/MdmEvkVQeWTZhcts3C+23W4RU20X9Zw1h6MLT6bT99pSXGw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MUK-4.3PS_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>Z83cH4k5Xsdb24zaJLICx2rWS87KEnp6EgWB3AgTDvsw+eCosz1auwHQDjkSA3fsb22uJPb1ha3TNhB2N/WQow==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Minimum_Geometry_5.0_EXO_Rev00.sdfa</Filename>
      <Signature>pzkJrfeNbrqSv06ooxUcDcKuaAU+qAlB0+mR7KhFhHsPQg/q2l60DC4i7VSVKOX7Myfafb1p6V5v5dULy3eK8Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Print-Model_5.0_EXO_Rev00.sdfa</Filename>
      <Signature>oTKYGrQFEmxJ0YhFba7TKmtyYIT2SMoMIL713VDN3nV+KlPC5uZqP0YDGXdGuQ96SOFNw4YlpcFLiQbrvqF2xg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Screw_5.0_EXO_Rev00.sdfa</Filename>
      <Signature>fh9Nd55uhoKAno0hYnBLH9Dn486ESKuyf8XwmnH2/TlU0Wghee0O7TDWyRcD6PW+xzVVboc2wncTuts4Ztxz3A==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMOK-5.0_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>MDpSdjX5hANUWEFgfllyTOGl1Jug0OTZElJijngqveCBJQ0u1CPFYVuaJ84lzTruafrER2sUr5MWi7nhEVsbGg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMOK-5.0_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>mrtepysoFJAmgYWPaQH4qPoDku31x3eglVyoyrPTKGwcHi1snpszRbc30mlMfwebNbuhbWa1qz1p2vKQNdvZ0g==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMUK-5.0_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>Hdd1PPTCMZM3ceqIKFGK/m6M2pc3AWH/6TdvOUnUoP7ePKoU0n9gwsHP01Jz0w6QYpgo5UHYZdoOJ2/j5E+vzA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMUK-5.0_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>fZsslUyCibaR9MBRzDs6Ywxvo/AMKlNUUyN4fAQ7fe/aqA8Wnr01xSg+d5j7XEqcpzzaumGFo+rblqwnaw3mlQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MOK-5.0_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>IGNhr0x7aaBbSumdgDD7Dm4ExnVJ3ns9j2SsD7uEgjKSmZC8KVaB9QVm/tuou78Ux+sH7Ag69XKAmOiHp1qmew==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MOK-5.0_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>zOI8WVzy4zFZpqDE1s2EGvBG2qqaQaHxEkURrVM9OUk84Vast+y2Jp+sHr84VXlMVm4cyr9dC68Ru53Ozn9veA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MUK-5.0_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>8h42RQCnwq6QfM/a48DGeqM179tmh33PIRUCGFATxu+QH/DXIxIdrcdH7jRYhEjQXU8npjWcOFrYiUF0T7/Upw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MUK-5.0_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>ciUnbz7HOXjJx6XCnSJx6kawRyKFMspVfVwRR3cktJxhh9C69CycYNCxQPHIH63X1W3EPhdKL1nXE7KyrH9TcA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG-PS_Minimum_Geometry_5.0_EXO_Rev00.sdfa</Filename>
      <Signature>8Rl996GTRCo0TSrmd3BQKFu998mHy/qpQ6mtD01SzBqWSWxusCermVDjLsUHInFaIsaFqlj2U1p3trTegL3C7w==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMOK-5.0PS_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>8AItCfpVh8ue4sCuRRi4gS4P7gxvuk4cCgi4Y70l0SqdeZiA0VC+2PebP6xTx+Bw49xCZ8pYVlSltfFj3IXqbA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMOK-5.0PS_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>DfFo7nekFSVUUaKa+Boa3dtfzCGeoyp3GVW/zGC4zdQWChfxzcwWNEV7H6W/gBwqT+yLldyY/f5+XnDZMnEGng==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMUK-5.0PS_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>5Jk1DPWNFbkF2fiE5v+sU4XIbCEehPVN2S8tDh2JAbICbBLa7BtFiUQbGokitUIVHlWmR+VUCm/JbOgaFvC6AA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMUK-5.0PS_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>UcMbT0miE+vA2f2b82KdwS8/9al3ts29LUNEa34R/iNHocURdjriFFopMVRpSuf2xhDudiKCzP8aeMW3dk8UfQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MOK-5.0PS_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>NYcHIzZeIDg8K1Noxbv59HVLXsYtF6EQzhd66JJ+I7SKz7cpJYXwgqrFHVgEggPopkw3hXSI7pDHSTUIuZNyLQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MOK-5.0PS_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>SsoOeH77g612vqIYJLpeygWi0vPzOHW3+CFeVrOEj9buomR55VC19UGVC1te4qko/I0KbcjBYNn0vwYfHV7Bpg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MUK-5.0PS_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>WFkJbYDz9INSKQYaxu+B4LqsdK3lnLFw5PbgbGDiKwPsZtMyUQLcqvDUG5oAFiTt94IdeJMALrs7/x6xHpPw5A==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MUK-5.0PS_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>JS9dawp/nDXaabdnyly7IbB5iqR5O/zE2Yy7zysoqRzV68VpO2Yaqbodt4Ix5XmjFKxSsDd8BLcGG4iJEPKrTw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Minimum_Geometry_6.0_EXO_Rev00.sdfa</Filename>
      <Signature>w1ZeMwm9IAnmQxcEN+GkrCdVjeT9Ijth812ZkoI2oBNvPag0ddhdKEGR+l5+hQjZFkH+5rAwVBuPJGQJfal4bw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Print-Model_6.0_EXO_Rev00.sdfa</Filename>
      <Signature>BdAsWIPCqYPdnpeuLAIADa9GluwReR2ZM/sEltMBpxiSpQ3yB/qNAePjs6tlFVPuQZBMy9Sr5toT7c635JXoGw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Screw_6.0_EXO_Rev00.sdfa</Filename>
      <Signature>fh9Nd55uhoKAno0hYnBLH9Dn486ESKuyf8XwmnH2/TlU0Wghee0O7TDWyRcD6PW+xzVVboc2wncTuts4Ztxz3A==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMOK-6.0_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>T78luC8SSzhZVG7r6r1POUdrIAQh2fARKx4UUlZxJm1xxHSnYGfJw3cVzjzbcpYo2FXXaGoyyPC27ovBcSewfg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMOK-6.0_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>20HyZYwcRKrued3kei2Ds6n76Ahw35g9hP4JmCTd49MLJM8Hovr8M8YIIH8HSAnnF2f23Flhh5XiEkh2qwkF+g==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMUK-6.0_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>R6VVeycWjaqSNeMjsq09EG6039VUiKMrnXdacvHHpHax0YegueRDujoySf3HFR7d39miVEw4hDX/wRZbpKeJcA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG PMUK-6.0_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>DOaBwPq56bZdPL3jrWuKZzi/IW21mI2Se2wOx8sgv5C7Ym3v2OaOQ5hvQc9tWas5HUGH/Fg8LT5C7MjdE2wb0A==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MOK-6.0_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>nSba4OrrscU5cT/eHi0yyFy/mbrNhw/reoIg71JjOoHEzwqq/JBpbhaMSPPeyjDkwr+ZuWLXly1NKY5iQv3dzQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MOK-6.0_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>Tdp3uS3IA3oSi/UG3HAaqwA756VKffWsVCmtzrWWCDyVqviWOTQ5J3dUs/fKxIngg1f9yxP3Qpi+1uDvpvF/6Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MUK-6.0_GH4.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>idSzAF06yJnmqYIGB/j1j0hDGqNcC8R9mP2F6xZAik04H4zgImO1020gziUpY7/WRcUbWMrZ/FqeJ+ujtpMCew==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG MUK-6.0_GH6.0_Scanbody_EXO_rev00.stl.STL</Filename>
      <Signature>LnjK7svVxeNHfd82/BMgMFmfsg8RWUEfb8N0/ZvwXF3GrH7dc2weY4PDzb6oYGD7GHWvGh2OybXB/hpm0d9AoQ==</Signature>
    </FileSignature>
  </FileSignatures>
</ImplantLibraryEntry>