Partner Magazine logo 16

logo 16 • the CAMLOG Partner Magazine • June 2017 logo 16 • the CAMLOG Partner Magazine • June 2017 The two-piece CERALOG Hexalobe implant is a true two-piece design in conjunction with reversible screw-retained abutments made of the high-performance polymer PEKK. The abutment can be attached optionally in the implant with a titanium or gold screw. Alternatively, the one-piece CERALOG Monobloc implant is available for purely ceramic solutions. Both implants are available in lengths of eight, ten, and twelve millimeters and a diameter of four millimeters. The ivory color, which is very close to the color shade of a natural tooth, and the properties of zirconium dioxide make for highly esthetic results. Innovative abutment with optimized Hexalobe implant- abutment connection Whether cemented solutions or hybrid crowns, both are possible with CERALOG Hexalobe abutments. The PEKK abutment is ideal for extreme loading as the ductility of PEKK reduces the stress factor and simulates tooth-like properties. Taking the special requirements for zirconium dioxide into account, the Hexalobe implant- abutment connection was developed specifically for this material. During insertion, torque forces are introduced tangentially into the implant, allowing a considerably higher torque than can, for example, be transferred with a hexagonal connection. In addition to the straight and angled PEKK standard abutment, a customized full zirconiumdioxide abutment has also been available for the two-piece implant since May 2017. This is available in two colors and supplied optionally with a gold or titanium screw. More than ten years of experience CERALOG is based on more than 10 years of dedicated research and development for the benefit of the patient. The first clinical studies were conducted in 2007 with the PRODUCTS 24 PRODUCTS 25 The demand for ceramic implants has increased considerably over the past few years. Many patients ask for highly esthetic and particularly tissue-friendly dental prostheses. As a leader in innovation, CAMLOG has been involved intensively in ceramic implants for several years and finally acquired a majority holding in AXIS biodental SA in autumn 2016, a company specializing in the development and manufacturing of innovative dental implant solutions made from high-performance ceramics. The CERALOG System consists of one and two-piece implants. With its two-piece design, the new CERALOG implant enables reversible screw-retained prosthetic solutions and thus offers greater safety and freedom in esthetic restoration options. In addition, CERALOG has impressively good mechanical properties that have only been associated with titanium to date. current material composition and surface texture. Marketing commenced with the one-piece Monobloc implant. The two-piece Hexalobe implant has been used successfully in clinical practice in its present configuration since early 2013. As such, CERALOG Hexalobe can draw on many years of clinical experience in the field of two-piece, reversible screw- retained zirconium dioxide implants. The dual surface texture combines two defined roughnesses on a single implant, whereby the implants are less rough in the neck area in order to promote soft tissue adaptation. The endosteal area of the implant body is provided with a micro-rough texture which enables targeted deposition of bone cells. This is made possible by Ceramic Injection Molding (CIM), a unique ceramic injection molding process that is used for manufacturing CERALOG Implants. This top technology makes it possible to manufacture complex shapes with various surface textures without additional abrasive processing steps. Every single CERALOG implant is subject to quality control. In this process, the implant is tested optically and dimensionally and with appropriate mechanical loading in a controlled process. More information at: www.camlog.com/en/implant- systems/ceralog/ CERALOG – AN INNOVATIVE CERAMIC IMPLANT SYSTEM SUCCESSFUL IN CLINICAL USE FOR SEVERAL YEARS DUAL SURFACE The dual surface texture of CERALOG is unique. The implant is less rough in the neck area for better adhesion of the soft tissue than the endosteal region which is optimized for osseointegration. This is made possible by the high-tech Ceramic Injection Molding (CIM) manufacturing process. INNOVATIVE ABUTMENT The ductility of the innovative abutment made of the high-performance polymer PEKK, simulates tooth-like properties and offers good sealing properties. REVERSIBILITY The CERALOG Hexalobe implant enables reversible screw-retained prosthetic solutions – cemented or as hybrid crowns. ESTHETIC The ivory color, which is very close to that of a natural tooth, and the properties of zirconium dioxide make for highly esthetic results. CERALOG ® MONOBLOC One-piece for purely ceramic restorations CERALOG ® HEXALOBE True two-piece design IDEAL CONNECTION Hexalobe – the ideal implant-abutment connection for ceramic implants. The tightening forces are transmitted perfectly into the implant, resulting in a considerably higher torque than can, for example, be transferred with a hexagonal connection.