Partner Magazine logo 17

logo 17 • CAMLOG Partner Magazine • March 2018 PRODUCTS 33 NEW ALIGNING TOOLS FOR THE COMFOUR ® ABUTMENT SYSTEM The conversion of the CONELOG ® SCREW- LINE implant systems and the CAMLOG ® SCREW-LINE Promote ® and Promote ® plus to the new packaging has been completed. The new mounted insertion post has proven itself for the insertion of implants into narrow tooth gaps. The design change of the insertion post required an adaptation of the COMFOUR ® Aligning tools. The new aligning tools (17° and 30°) now not only differ in that they are attached to the insertion posts and are slightly slimmer than the previous version, but also in that the triangular guide for the holding key attachment has been extended. The longer functional surface offers greater safety and support when fixing the holding key for fine adjustment of the inner configuration for exact cam alignment and thus for the correct positioning of the angled bar abutments of the COMFOUR ® Concept. The new insertion tool also fits into the alignment tools and can also be used for adjusting the inner implant geometry. The standard aligning tools continue to be available for the Guide implants. (Article number is J2269.0003 for the 17° aligning tool and J2269.0004 for the 30° aligning tool.) CAMLOG System New packaging concept Guide System from CAMLOG Insertion post Aligning tool Insertion post Aligning tool Cam alignment distal 30° Cam alignment distal 30° The COMFOUR ® Aligning tools for the new packaging system can be supplied under the following article numbers: Aligning tool 17° – Art.No. J2269.005 Aligning tool 30° – Art.No. J2269.006