CAMLOG ROOT-LINE 2 Surgical Procedure

27 CAMLOG ® ROOT-LINE 2 IMPLANT PUNCH-MARKING THE CORTICAL BONE The round bur Ø 2.3 mm is used for punch-marking the cortical bone, which simplifies the use of the drills to follow. The bur is inserted up to the bur equator. Recommended drilling speed: 800 rpm. PILOT DRILLING The pilot drill with reduced coil determines the depth and axis of the implant site. The depth marks on the drill correspond to the implant lengths 7, 9, 11 and 13 mm. The maximum drilling depth is 16 mm. For safety reasons, a depth stop matching the proposed implant length should be used. Recommended drilling speed: 800 rpm. max. 800 rpm Pilot drill, reduced coil, Ø 2.0 mm Round bur Ø 2.3 mm max. 800 rpm If no drilling template is used, the depth stops may be placed to the pilot drill after the markings have been drilled. Once drilling is complete, the depth and axis of the implant bed is checked using the paralleling pins. If several implants are placed, a paralleling pin is inserted into the first drill hole to then align the other implant axes. The pilot drill is aligned parallel to the paralleling pin and visually checked from two planes (sagittal and transversal). Punch-marking the Cortical Bone Pilot drilling Depth measurement after pilot drilling Paralleling pin SCREW-LINE* 16 mm 13 mm 11 mm 9 mm 7 mm 0 * also for ROOT-LINE 2