CAMLOG ROOT-LINE 2 Surgical Procedure

29 CAMLOG ® ROOT-LINE 2 IMPLANT FORM DRILLING Diameters and lengths Diameter- and length-calibrated form drills with reduced drill coil are avail- able for each implant size. The form drills are color-coded and laser-marked. The form drills included in the surgery sets are supplied with a color-coded, removable depth stop. This must only be used with form drills ROOT-LINE 2. Depending on the specified drilling depth (implant length), the hole diam- eter is expanded progressively with the series of form drills until the intended implant diameter is achieved. Recommended drilling speeds: Ø 3.3 mm 550 rpm Ø 3.8 mm 500 rpm Ø 4.3 mm 400 rpm Ø 5.0 mm 350 rpm Ø 6.0 mm 300 rpm The protocol-specified insertion depth for ROOT-LINE 2 implants, with depth stops in place, is the implant length (9, 11, 13, 16 mm) minus 0.4 mmwith the circular stop at the bone level, so that the implant shoulder extends 0.4 mm above the ridge. The preparation is performed using the laser marks (black) as guides. The marks are spaced 1.0 mm apart. The mark widths are 0.4 mm. Form drill ROOT-LINE 2 Ø 3.3 mm Ø 3.8 mm Ø 4.3 mm Ø 5.0 mm Ø 6.0 mm 9 mm 11 mm 13 mm 16 mm Length 1 mm 1 mm 1 mm 0.4 mm 0.4 mm 0.4 mm