CAMLOG ROOT-LINE 2 Surgical Procedure

30 CAMLOG ® ROOT-LINE 2 IMPLANT DEPTH STOP During form drilling, the depth stop rests on the highest point of the crest and thereby limits the insertion depth. Since the circular bony ridge may be irregular, the form drills are equipped with a removable depth stop. If a deeper insertion is required for esthetic or functional reasons, the depth stop can be removed and formdrilling can be continued for a further 2mmat most (watch for anatomic structures!). The reusable depth stop can be used on replacement form drills (delivered without depth stops). The depth stops must be removed before cleaning the drill. The cleaned depth stops must be reattached before sterilization (see also “Preparation instructions for the CAMLOG ® /CONELOG ® Implant System”, Art. No. J8000.0032). The depth stops can be reordered individually. CAUTION! Because of the cutting angle on the drill tip of the form drill, the length exceeds the implant by up to 0.6 mm. The lower edge of the first depth mark corresponds to the drill length with the depth stop in place. Form drilling with depth stop Form drilling without depth stop Form drilling without depth stop for deeper insertion Submersion depth of implant shoulder at bone level Option: Vertical position of the implant shoulder on bone level 0.4 mm Promote ® plus 1 mm 1 mm 1 mm 0.4 mm SURGICAL PROCEDURE