CAMLOG ROOT-LINE 2 Surgical Procedure

47 CAMLOG ® ROOT-LINE 2 IMPLANT IMPRESSION TAKING OF CAMLOG ® IMPLANTS INTRODUCTION The CAMLOG ® impression-taking system provides a highly precise, rota- tion-resistant transfer system for both closed and open tray methods. All system components are color-coded by implant diameter. It must be made sure that only implants and impression-taking components of the same diameter (by color-coding) are used with each other. No components of different diameters should be attached to one another. The system compo- nents must not be modified. IMPRESSION-TAKING METHODS The open or closed tray method may be selected for impression-taking. If heavily divergent implant axes are present, or combination with a func- tional impression-taking is desired, the open impression-taking method should be used. For the use of the Logfit ® prosthetic system, the ball abut- ments and Locator ® abutments, or a prefabricated bar, special matching impression posts are available. IMPRESSION-TAKING MATERIAL Silicone or polyether materials can be used as impression-taking materials for the open and closed impression-taking methods. All impression posts with K article numbers are compatible with all CAMLOG ® implant lines. IMPRESSION POSTS, OPEN TRAY ART. NO. K2121.3300 K2121.3800 K2121.4300 K2121.5000 K2121.6000 Impression post, open tray, incl. fixing screw FOR IMPLANT Ø 3.3 mm 3.8 mm 4.3 mm 5.0 mm 6.0 mm IMPRESSION POSTS, CLOSED TRAY ART. NO. K2110.3300 K2110.3800 K2110.4300 K2110.5000 K2110.6000 Impression post, closed tray, incl. impression cap, bite registration cap and fixing screw FOR IMPLANT Ø 3.3 mm 3.8 mm 4.3 mm 5.0 mm 6.0 mm IMPRESSION CAP ART. NO. J2111.3300 J2111.3800 J2111.4300 J2111.5000 J2111.6000 Impression cap for impression post, closed tray (5 units) FOR IMPLANT Ø 3.3 mm 3.8 mm 4.3 mm 5.0 mm 6.0 mm IMPRESSION TAKING